Company: Lake Shore Boat Top Company Inc.
Name: “Carver with a twist” – Hard Top Enclosure
Location: Detroit, MI
This 13-panel enclosure is made with black Sunbrella fabric and Strataglass windows. The front windows are made with .60 mil Strataglass and the side and aft panels are .40 mil Strataglass. The project also has upper vent screens in the front windows and rear center window with protective flaps on the inside, designed for maximum air flow. The door entrances are designed with interchangeable full-screen and window-glass panels. The hardtop was designed to go with a .60 mil Strataglass for the front windows for more rigidity. The remaining panels are .40 mil Strataglass.
Designers: Rob Kotowski, Bob Kotowski, Lake Shore Boat Top Company
Fabricators: Rob Kotowski, Bob Kotowski
Project Manager: Rob Kotowski
Installer: Rob Kotowski, Bob Kotowski
- Strataglass-J Ennis Fabrics
- Sunbrella-Trivantage LLC
- Gore Tenara Architectural Fabric-Trivantage LLC
- YKK Zippers-Manart-Hirsch Co.